Precautions for Correct Replacement of Dust Collector Bags

The correct installation method, tutorial and precautions for the replacement of dust collector bag.

1. When replacing the dust collector bag, hold the opening end of the dust bag tightly with your hands while keeping the rest of the dust bag folded, and push the folded part of the dust bag into the sleeve to pass through the flower plate. After the folded part of the dust bag is opened under the flower board, let go of the top of the dust bag, and let the grooved cushion spring ring rest on the sleeve of the flower board.

2. Let the weight of the dust bag itself fix the position slowly, and let the metal ring pull out the sleeve from the top of the dust bag. Install the sleeve in the hole of the flower plate.

3. Hold the spring ring of the grooved pad tightly with both hands (no need to pull up the dust bag), and press the spring ring inward with both hands to make it into a "C" shape. While keeping the spring ring in a "C" shape, place the raised side of the groove-shaped spring ring to the edge of the nearest flower plate hole. Hold one side of the raised raised "C"-shaped spring ring with one hand, and fix the raised "C" shape to the edge of the flower board with the other hand.

4. Fix one side of the raised "C" spring ring with one hand, and slowly stretch the other side of the spring ring with the other hand. Insert the groove of the spring ring exactly into the hole of the flower plate.

5. If you can't hear the "pop" sound when the spring ring is fully stretched, push the spring ring to the inner edge of the plate opening with the thumb of one hand, so that the groove of the spring ring fits into the inner edge of the flower plate hole .

6. Under normal circumstances, you should be able to hear the sound of success, otherwise, bend the spring ring from another position into a "C" shape. Lift the spring ring higher than the flower plate, and then repeat the above installation steps.

7. Install the filter bag frame of the dust collector into the dust bag. When installing, be sure to put the frame slowly into the dust bag. If there is a large resistance, you must pull it up a little, and then put it down gently. If the resistance is still large, repeat the operation until you can Easy to put down. Prevent the dust bag from being scratched by the corners of the frame! It is strictly forbidden to make the frame hit the dust bag!

8. Make sure that the gasket of the dust bag can be well sealed with the hole surface of the flower plate.

9. Install the filter bag frame locator or fastening parts of the dust collector, and make sure the dust bag/dust bag frame gasket works under proper pressure.